INT 15 - TopView - SEND MESSAGE - "APPLY" - WRITE PANEL TO WINDOW
AH = 12h
BX = 0400h
STACK: DWORD handle of panel object
DWORD window's handle (or 0 for current task's window)
DWORD length of panel name
DWORD pointer to panel name
Return: STACK: DWORD handle of keyboard or 0
DWORD handle of window which was used
Notes:  status of APPLY may be checked with STATUS message
panel MUST have the following format
first byte must be 1Bh (i.e. must start with a stream)
first opcode in stream must be E5h
single byte arg of opcode is interpreted thus:
bits 7,6  11 means create new window
10 means create new field table for existing window
01 means use existing window and field table
bit 5 if set, panel contains a field table
(creates a new keyboard and puts it in field mode)
bit 4 if set, panel contains input fields
bit 3 if set, panel contains select fields but no input fields
if the panel contains input or select fields, a keyboard handle is
returned; either the window's current open keyboard or a
newly-created keyboard object.  The caller should read that keyboard
to obtain input from the panel.

See also: 1512

1512 - TopView - SEND MESSAGE - "APPLY" - WRITE PANEL TO WINDOW